Homebrew DC: Imperial Stout

Photo courtesy of keith_and_kasia
Grandfather Raven Imperial Stout
courtesy of keith_and_kasia

The British are not the only ones to fall in love with the Stout. The Russians went crazy for the black British brew as well.  The problem, as the Czarists soon realized, was that the dark beer didn’t travel well.  Luckily for the Russians, the British had experienced this problem before, in shipping ale to quench the growing British population in India.  The British discovered that in order to allow ale to survive the long journey to India, the solution was to increase the preservative qualities of the alcohol and hop content of the ale, thus creating the Indian Pale Ale style.  The British applied this same technique to satisfy the growing Stout fan base in Russia.  The result was a thicker, hoppier, more potent style of Stout referred to as Imperial Stout, or Russian Stout.

In general, Stouts (particularly Dry Stouts) possess dark color and a light body with low alcohol content and hop presence.  To help the Stout endure the voyage from London to Moscow, British brewers capitalized on the bacteria-killing characteristics of alcohol and hops.  To achieve this, the quantities of malt and hops were increased from the standard Stout recipe to raise the amount of fermentable sugars and hop presence in the final product.  The Alcohol By Volume (ABV) of Imperial Stouts can range between 8% and 12% as compared to 4% to 5% ABV of the average Dry Stout.  The increased specific gravity from the additional malt gives the Imperial Stout a thicker mouthfeel.  Hop flavor and aroma, which is often barely detectable in Dry Stouts, has a relatively high presence in an Imperial Stout.

Imperial Stouts are essentially Dry Stouts with an increased specific gravity and more hops.  Similar to Dry Stout brewing, when creating your own batch of Imperial Stout from extract it is best to use light malt extract and focus on the specialty grains to give the brew its dark color and roasty flavor.  Use around nine pounds of malt extract as the base.  This increase in fermentable sugars will yield the higher ABV percentage.  The specialty grains are similar to those used other Stout varieties such as the dark varieties of crystal and caramel malt, chocolate malt, roasted barley, and black malt.  These specialty grains will produce a nice opaque, dark color and add roasty flavor.

The use of hops in Imperial Stouts requires some consideration due to the style’s high specific gravity.  A high specific gravity inhibits the ability of the wort to absorb the bittering, flavoring, and aroma characteristics of the hops.  What this means is a lot of hops are needed to achieve the right level of bitterness and flavor.  The amount of hops in a typical Imperial Stout recipe often exceeds the amount needed for an American IPA recipe, and the American IPA is a very hop-filled style of ale.  Three or four ounces of hops with a high Alpha content (10 to 14 AAU), such as Chinook, Nugget, or Eroica, will work as bittering hops.  Two ounces of hop varieties with lower Alpha content (4 to 8 AAU), such as Cascade, Fuggles, Kent Goldings or Mount Hood can work well as flavoring hops when added with 30 minutes left in the boil, and the same amount and varieties can be added as finishing hops in the last ten minutes of the boil.

One of the desired outcomes when making an Imperial Stout is a high ABV percentage.  For this reason, I recommend making a large yeast starter using regular high-gravity ale yeast, such as Wyeast British Ale #1098 or White Labs WLP007 Dry English Ale.  Allowing a little extra fermentation time than the average Stout style is also a good idea.  A primary fermentation of 14 days and a secondary fermentation for about a month will yield good results.

Here is a basic Imperial Stout homebrew recipe for a five-gallon batch size.  You can get these ingredients at any homebrew store.  Substitute specialty grain and hops varieties and quantities to meet your taste.

Base Malt:

  • 9 pounds Light Malt Extract

Specialty Grain:

  • 1 pound 90L Crystal Malt
  • 1 pound Chocolate Malt
  • 1 pound Roasted Barley

Bittering Hops:

  • 2 ounces Nugget (pellets) 60 minutes
  • 1 ounce Chinook (pellets) 60 minutes

Flavoring Hops:

  • 1 ounce Kent Goldings (pellets) 30 minutes
  • 1 ounce Fuggles (pellets) 30 minutes

Finishing hops:

  • 1 ounce Kent Goldings (pellets) 10 minutes
  • 1 ounce Fuggles (pellets) 10 minutes

Yeast:

  • 2 packages of liquid yeast or a yeast starter
  • Dry champagne yeast will also work in a pinch

Fermentation:

  • Primary: 14 days
  • Secondary: 30 days

This article first appeared on RealHomebrew.com.

Carl Weaver is a writer and brewer for RealHomebrew.com and has been making beer and wine for more than 20 years. He is also an avid photographer and writer and just finished his first book, about a trip he took to Thailand to live in Buddhist monasteries. He considers himself the last of the Renaissance men and the luckiest darned guy in the world. Follow him on Twitter.

Comments are closed.